 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AZ942H 12 AMP MINIATURE PC BOARD RELAY FEATURES * * * * * * * * Extremely low cost 12 Amp switching capacity Proof tracking index (PTI/CTI) 250 Clearance and creepage distance >2.5 mm Class F insulation (155 C) available Meets IEEE 587 6 kV lightning surge UL, CUR file E43203, VDE file 40010958 GENERAL DATA SPST (1 Form A) SPDT (1 Form C) Resistive load Max. switched power: 196 W or 2770 VA Max. switched current: 12 A Max. switched voltage: 150 VDC* or 300 VAC Max. switched power: 196 W or 1939 VA Max. switched current: 12 A Max. switched voltage: 150 VDC* or 300 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. CONTACTS Arrangement Ratings Form A Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 10A 250 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 3000 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Insulation (according to DIN VDE 0110, IEC 60664-1) Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight Packing unit in pcs 100 megohms min. at 20C, 500 VDC, 50% RH Overvoltage category: II Pollution degree: 2 Nominal voltage: 250 VAC Greater than 10% of nominal coil voltage At nominal coil voltage Class B: -40C(-40F) to 70C(158F) Class F: -40C(-40F) to 85C(185F) -40C(-40F) to 105C(221F) 0.062" (1.5 mm) DA at 10-55Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 13 g 20 per plastic tube / 1000 per carton box Form C Rated Load UL, CUR Form A 10 A at 28 VDC, 100k cycles 10 A at 277 VAC, 25k cycles 7 A at 28 VDC, 100k cycles 7 A at 277 VAC, 100k cycles 12 A at 125 VAC, 100k cycles (N.O.) 12 A at 125 VAC, 50k cycles (N.C.) 10 A at 250 VAC, 50k cycles (N.O.) 7 A at 250 VAC, 50k cycles (N.C.) Silver tin oxide <100 milliohms initially Form C VDE Material Resistance COIL Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise Temperature 230 mW Class B: 1.7 W at 20C (68F) ambient Class F: 2.2 W at 20C (68F) ambient 25C (45F) at nominal coil voltage Class B: Max. 130C (266F) Class F: Max. 155C (311F) NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-07-29 Junkersstrasse 3, D-82178 Puchheim, Germany AZ942H RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 Must Operate VDC 2.4 4.0 4.8 7.2 9.6 14.4 19.2 38.4 Max. Continuous VDC 6.5 11.0 13.0 20.0 26.0 39.0 52.0 104.0 Coil Resistance Ohm 10% 25 70 100 225 400 900 1,600 6,200 ORDER NUMBER* Form A (SPST-N.O.) AZ942H-1A-3DTH AZ942H-1A-5DTH AZ942H-1A-6DTH AZ942H-1A-9DTH AZ942H-1A-12DTH AZ942H-1A-18DTH AZ942H-1A-24DTH AZ942H-1A-48DTH Form C (SPDT) AZ942H-1C-3DTH AZ942H-1C-5DTH AZ942H-1C-6DTH AZ942H-1C-9DTH AZ942H-1C-12DTH AZ942H-1C-18DTH AZ942H-1C-24DTH AZ942H-1C-48DTH * Substitute "DETH" in place of "DTH" for epoxy sealed versions. To indicate Class F version, add suffix "F". IEEE STANDARD 587-1980 (ANSI/IEEE C62.41-1980) SURGE VOLTAGE WITHSTAND RATING Test 1.2 x 50 usec positive pulse 1.2 X 50 usec negative pulse 0.5 us 100 kHz ring wave Rating 6 kV 6 kV 6 kV Description Contact to coil - 5 pulses Contact to coil - 5 pulses Contact to coil - 5 waves MECHANICAL DATA PC BOARD LAYOUT .87 [22.0] .64 [16.3] .082 [2.1] .085 [2.15] .236 [6.0] .65 [16.5] .138 [3.5] .472 [12.0] .016 [0.4] .078 [2.0] .480 [12.2] 5 x o .051 [o 1.3] VIEWED TOWARDS TERMINALS .016 [0.4] 4 x .020 [0.5] WIRING DIAGRAMS .040 [1.0] 4 x .036 [0.9] FORM A FORM C VIEWED TOWARDS TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: 0.010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-07-29 Junkersstrasse 3, D-82178 Puchheim, Germany |
Price & Availability of AZ942H-1C-9DTH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |